Table of Contents
Advertisement
7. Prepare a soft cloth or similar device to catch components if they fall
out of the lens module.
8. See illustration below. Open the lens module by unscrewing the
retaining ring (D). To obtain a 32° beam angle, remove the concave
lens (C) and thin spacer (B). Insert the thick spacer (E) supplied with
the fixture and retighten the retaining ring (D).
25° beam angle
Remove B + C
9. Retain components B and C for possible future use.
32° beam angle
A
B
C
D
Basic service
A
Insert E
E
D
21
Advertisement
Table of Contents
