Table of Contents
Advertisement
O
PERATION
The lamp will light when the mains switch at the rear of the fixture is turned
on.
Important! This fixture is designed for use with a gobo and/or structured
glass filter. Do not use it without either a gobo or a filter
installed. Doing so may cause heat damage that is not covered
by the product warranty.
I N S T A L L I N G A G O B O / T E X T U R E G L A S S
The fixture comes with a:
• Red-hued texture glass (installed)
• Blue-hued texture glass
You can install standard size D gobos with a maximum image diameter of
40 mm (1.6 in.).
To change the gobo/texture glass:
1 Switch the mains power off and allow the fixture to cool for 20 minutes.
2 Unscrew the gobo access hatch on the top of the fixture.
12
Mania PR1 user manual
3
Advertisement
Table of Contents
