Advertisement
OPERATING PROCEDURES AND SAFETY INSTRUCTIONS
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER NO USER FRIENDLY PARTS
Battery Chargers
Sealed or Valve Regulated
Lead Acid Batteries
Model: PSC-124000A
CAUTION
THIS UNIT SHOULD NOT BE USED IN OUTDOOR APPLICATIONS.
EXPOSURE TO MOISTURE MAY RESULT IN FIRE OR SHOCK HAZARD
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Power-Sonic PSC-124000A
Summary of Contents for Power-Sonic PSC-124000A
- Page 1 Battery Chargers Sealed or Valve Regulated Lead Acid Batteries Model: PSC-124000A OPERATING PROCEDURES AND SAFETY INSTRUCTIONS CAUTION: CAUTION TO PREVENT THE RISK OF ELECTRIC SHOCK, DO THIS UNIT SHOULD NOT BE USED IN OUTDOOR APPLICATIONS. NOT REMOVE COVER NO USER FRIENDLY PARTS...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS PLEASE SAVE THESE INSTRUCTIONS This document contains important safety and operating instructions for Model PSC-124000A battery chargers. Before using the battery charger, please read all instructions and cautionary markings on the battery charger, the battery, and the product using the battery.
-
Page 3: General Description
GENERAL DESCRIPTION This unit is a two stage, constant voltage battery charger with current limiting, current fold back, and automatic temperature compensation of the output voltage. It is protected against shorting the out- put terminals and reversing the output terminals on a battery. It is equipped with an IEC-320 type power input module with fuse holder and a spare fuse. -
Page 4: Troubleshooting
conditions. For this feature to work properly, the battery and charger should be located in the same environment (allow the battery and charger to stabilize at room temperature before charging). Initially, the charger open circuit voltage may read a little high until its internal temperature warms during operation, thereby lowering the voltage. -
Page 5: Battery Charger Specifications
power cord. Use a flat head screwdriver or a coin to pry open the fuse drawer or holder. Replace the blown fuse with the spare You can use the old fuse to push out the spare fuse. Now is a good time to install a new spare fuse. - Page 6 Power-Sonic Corporation 7550 Panasonic Way San Diego, CA 92154 Tel: 619-661-2020 Fax: 619-661-3650 E-Mail: quality-assurance@power-sonic.com...
Need help?
Do you have a question about the PSC-124000A and is the answer not in the manual?
Questions and answers