Download  Print this page


Table of Contents
If the throttle grip play cannot be ad-
justed with the accelerator cable ad-
juster at the throttle grip, use the de-
celerator cable adjuster located un-
der the fuel tank.
Turn out the decelerator cable adjust-
ing nut until there is no play when the
throttle grip is completely closed.
Tighten the locknut.
A. Adjuster
B. Locknut
C. Throttle Cable (Decelerator Cable)
Turn out the accelerator cable ad-
juster until a play of 2 ∼ 3 mm (0.08
∼ 0.12 in.) is obtained at the throttle
Tighten the locknut.
With the engine idling, turn the han-
dlebar to each side.
movement changes the idle speed,
the throttle cables may be improperly
adjusted or incorrectly routed, or they
may be damages. Be sure to correct
any of these conditions before idling.
Operation with improperly ad-
justed, incorrectly routed, or
damaged cable could result in
an unsafe riding condition. Be
sure the control cable is ad-
justed and routed correctly, and
is free from damage.
If handlebar


Table of Contents

   Also See for Kawasaki VERSYS

This manual is also suitable for:

Versys abs

Comments to this Manuals

Symbols: 0
Latest comments: