Reread Delay - Honeywell 3800 Quick Start Manual

Trigger
The following bar codes will allow you to use the
reader in Manual Trigger mode (need to press the
trigger to read), Automatic Trigger mode (the beam
is always on), or Presentation mode (the reader is
activated when it "sees" a bar code).
Manual Trigger
(Default)
Automatic Trigger
Presentation Mode

Reread Delay

This sets the time period before the scanner can
read the same bar code a second time. Setting a
reread delay protects against accidental rereads of
the same bar code.
Medium Reread Delay
for 3800 only
Medium Reread Delay
for 3800g, 3800r and 3800i
7