Download  Print this page

Jensen Smart Talk JCR-290 User Manual Page 9

Am/fm talking dual alarm clock radio with smart talk.
Hide thumbs

Advertisement

WHAT IS SMART TALK™?
Smart Talk is an innovative clock operating system using the latest voice
recognition technology. It's the HANDS-FREE way to set your alarm
clock. No more fumbling with instructions or pressing multiple buttons to
set the time and alarm. Once the system is activated by saying the
trigger word "Smart Talk", you now simply say one of the preset voice
commands and follow the voice prompts to set-up the clock using your
voice! Setting the Time, Alarm, Sleep Time, Sleep Sound and Alarm
Sounds are just a few of the features you can control with voice
commands.
As you become more familiar with this technical marvel you will
understand that it has been specifically programmed for voice command
of multiple functions. Depending on the surrounding ambience (potential
noise influence) and how you speak its "language", there may be
instances of misunderstood commands. If this happens, just repeat them
after checking the way to say your commands so that SmartTalk will
obey and also talk to you properly. Finally this product can have all
functions operated manually the same as all other clock radios.
SETTING UP DAILY ALARMS AND CLOCK
USING MANUAL SETTINGS
In radio off mode, press SET BUTTON (#5) to enter AL1/AL2/Time
setup mode.
1. The HOUR DIGITS and AL1 indicator in the LCD panel will flash.
2. Using the > (UP) (#6) or < (DOWN) (#4) BUTTONS, adjust to the
desired hour for AL1.
3. Press SET BUTTON (#5). The MINUTE DIGITS and AL1 indicator
in the LCD panel will flash (#25).
4. Using the > (UP) (#6) or < (DOWN) (#4) BUTTONS, adjust to the
desired minute for AL1.
5. Press SET BUTTON (#5). The SOUND EFFECT INDICATORS of
AL1 will flash (#25).
6. Use the > (UP) (#6) or < (DOWN) (#4) BUTTONS to choose a
Wakeup Alarm Sound - Ocean, Rain, Brook, Radio or Beep Alarm.
E-8

Advertisement

Table of Contents

   Related Manuals for Jensen Smart Talk JCR-290

Comments to this Manuals

Symbols: 0
Latest comments: