Disassembly - Pioneer DVR-RT500-S Service Manual

1

7.8 DISASSEMBLY

1. REMOVAL OF MECHANICAL PARTS AND P.C. BOARDS
1-1: TOP CABINET AND FRONT CABINET
A
(Refer to Fig. 1-1)
1. Remove the 5 screws 1.
2. Remove the Top Cabinet in the direction of arrow (A).
3. Disconnect the following connector: (CP681).
4. Unlock the 10 supports 2.
5. Remove the Front Cabinet in the direction of arrow (B).
6. Remove the 3 screws 3.
7. Remove the Operation PCB in the direction of arrow (C).
B
Top Cabinet
1
Front Cabinet
(B)
2
2 3
C
2
2
2
2
2
2
2
2
1-2: FLAP (Refer to Fig. 1-2)
1. Open Flap to 90° and flex in direction of arrow (A), at
the same time slide in direction of arrow (B).
D
2. Then lift in direction of arrow (C).
(C)
E
F
98
1
2
1
1
(A)
1
3
3
Operation PCB
Fig. 1-1
(A)
(B)
Flap
Fig. 1-2
DVR-RT500-S
2
3
1-3: DECK CD AND DVD/HD MPEG PCB
(Refer to Fig. 1-3)
1. Remove the 2 screws 1.
2. Remove the Deck Shield Assy in the direction of arrow
(A).
3. Remove the 6 screws 2.
4. Disconnect the following connectors:
(CP504, CP1703, CP8301,CP8302, CP8303).
5. Remove the Deck CD Block in the direction of arrow (B).
6. Remove the 4 screws 3.
7. Remove the MPEG Shield in the direction of arrow (C).
8. Disconnect the following connector: (CP4001).
9. Remove the DVD/HD MPEG PCB in the direction of
arrow (D).
10. Remove the 2 screws 4.
11. Remove the DVD Angle (L) in the direction of arrow (E).
1
12. Remove the 2 screws 5.
13. Remove the DVD Angle (R) in the direction of arrow
(F).
2
2
2 4
4
DVD Angle (L)
(A)
1
Deck Shield Assy
3
4
Deck CD
(E)
(F)
2
(D)
1
DVD Angle (R)
DVD/HD MPEG PCB
(C)
MPEG Shield
3
3
3
3
(B)
4
2
2
5
5
Fig. 1-3