Mute/Pause Function; Audio Adjustments; Bass/Treble Adjustment; Balance Adjustment - Fiat Idea Sound System Owner's Manual

MUTE /PAUSE FUNCTION
(turning off the volume
completely)
To switch on the Mute function, briefly
press the button MUTE. Volume will grad-
ually lower and the display will show the
word "MUTE" (when in radio mode) or
"PAUSE" (when in CD or CD-Changer
mode).
To switch off the Mute function, press the
button MUTE again. Volume will gradual-
ly become louder returning to the value
set before switching on the Mute function.
Changing volume will deactivate the Mute
function and the volume will be set to the
new level selected.
With the Mute function on:
❒ if an emergency alarm or a traffic bul-
letin arrives with the TA function on,
the message ignores the Mute function.
The Mute function will be resumed at
the end of the traffic announcement.
12

AUDIO ADJUSTMENTS

The options proposed by the audio menu
differ according to the audio source se-
lected: AM/FM/CD/CDC.
To change Audio functions, press briefly
button AUDIO. The display will show
"BASS".
To scroll the Menu options, use buttons
N or O. To change the setting of the op-
tion selected, press buttons ÷ or ˜ .
The display will show the current status
of the function selected.
The functions controlled by the menu are
the following:
❒ BASS (bass adjustment);
❒ TREBLE (treble adjustment);
❒ BALANCE (right/left balance);
❒ FADER (front/rear balance);
❒ LOUDNESS (LOUDNESS on/off);
❒ EQUALIZER (standard equalization ac-
tivation and selection);
❒ USER EQUALISER (personal equaliza-
tion setting).
TONE ADJUSTMENT
(bass/treble)
Proceed as follows:
❒ Use button N or O to select "BASS"
or "TREBLE" in the AUDIO menu;
❒ press button ÷ or ˜ to in-
crease/decrease the basses or trebles.
Pressing the buttons briefly the change is
gradual by steps. Pressing longer, changing
is faster.

BALANCE ADJUSTMENT

Proceed as follows:
❒ Use button N or O to select "BAL-
ANCE" in the AUDIO menu;
❒ press button ÷ to increase the
sound from the right speakers or but-
ton ˜ to increase the sound from
the left speakers.
Pressing the buttons briefly the change is
gradual by steps. Pressing longer, changing
is faster.
Select "÷ 0 ˜" to set the same val-
ue for both right and left speakers.