Download  Print this page

Handset Registration - Clarity XLC 3.4 User Manual

Extra loud cordless speakerphone with caller id.
Hide thumbs

Advertisement

HANDSET REGISTRATION

XLC3.4
REGISTERING THE XLC3.4
Handset
In order to use the XLC3.4 (or XLC3.1) handset, you must
Needs
register it to the XLC3.4 base.
Registration
Pull the handset's battery tab located on the bottom of
the device, and then press MENU to start registering or
deregistering your handset from your system.
Hold Base
FIND Key
For 5 Secs
TO REGISTER AN UNREGISTERED HANDSET
1. Press MENU to enter registration mode. You will see
displayed on the screen, "Handset Needs Registration."
Then Press
2. Press and hold the FIND key on the XLC3.4 base for five
MENU Key
seconds, until the base visual ringer starts flashing. Release
FIND key on the XLC3.4 base.
3. Press MENU key on the handset.
4. The screen shows "Registering... ", then "Registration
Registering...
Successful" (accompanied by five quick beeps).
5. Your handset is now registered to your XLC3.4 system.
Your screen will display "Handset X," (where "X" is the
number of the actual handset registered, such as the second
or fourth handset, etc.).
Registration
Successful
You can extend the number of handsets by using additional
XLC3.1 handsets (sold separately).
TO REGISTER YOUR HANDSET AGAIN (or to
Register
register to a different XLC3.4 system)
Auto Talk
1. In standby mode, press MENU.
Voice Asst
2. Press DOWN arrow five times to advance the row
reading "Phone Setup" to the top of the screen.
3. Press MENU to enter the setup section. The screen
Register
displays "Register" on the screen's top row now.
Register
4. Press MENU to enter the Registration section.
Deregister
5. Press MENU again to select "Register."
6. Follow the Registration steps listed above.
Register
TO DEREGISTER THE HANDSET
Register
Deregister
1. See the six steps listed above, then press MENU to select
"Deregister."
2. Your handset will deregister from your base as
HANDSET 1
soon as you press MENU. The screen will show "Handset
Deregistered
X Deregistered"(again, where "X" is the number of the
handset registered), then "Handset Needs Registration."
28
TROUBLESHOOTING
XLC3.4
The unit will not operate / no dial tone:
Verify the AC adapter is securely plugged into the AC outlet, the
base and the telephone.
Verify the telephone line cord is securely plugged into the wall jack
and the telephone.
Make sure the handset battery is fully charged.
Make sure the battery has been placed in the battery compartment
correctly. (The circular metal contacts on battery need to touch
the metal springs inside battery compartment.)
Verify the telephone is in the correct dialing mode: Tone (touch)
or Pulse (rotary).
Make sure you are in the usable range of the base station.
The phone does not ring when you receive a call:
Make sure the RINGER switch on both handset and base is
set to ON.
Verify the AC adapter is securely plugged into the AC outlet,
the base and the telephone.
Verify the telephone line cord is securely plugged into the wall
jack and the telephone.
Make sure you are within the usable range of the base station.
You may have too many extensions on your line. Try unplugging
a few devices.
Noise, interference or other calls heard while using the
handset:
Make sure you are within the usable range of the base station.
Make sure the handset battery is fully charged.
Try relocating the base unit to another location.
Make sure the AC adapter is not plugged into the wall outlet
with other appliances.
E
N
G
L
I
S
H
29

Advertisement

Table of Contents

   Also See for Clarity XLC 3.4

   Related Manuals for Clarity XLC 3.4

This manual is also suitable for:

Xlc 3.4

Comments to this Manuals

Symbols: 0
Latest comments:
  • Edgar Klugman Jun 14, 2019 09:45:
    I AM A SLOW READER AND CAN'T COMPREHEND IT ALL IN A SHORT TIME. THIS SHOULD BE STRUCTURED DIFFERENTL​Y. I AM SO IGNORANT WHEN IT COMES TO TECHNOLOGY​. I EVEN HAVE A DOCTORATE AND AM STRUGGELIN​G. (ONE SIZE DOES NOT NECESSARIL​Y FIT ALL PEOPLE. PERHAPS YOU NEED TO SEND ME BACK TO SCHOOL IF I AM GOING TO BECOME AN EFFECTIVE CLARITY TELEPHONE USER.....N​OT RIGHT NOW!
  • Edgar Klugman Jun 14, 2019 09:05:
    Please send me a copy as soon as possible. The man who delivered the phone probably went off with the empty box and the manual.
  • CARMA STEWART Aug 08, 2016 11:44:
    Is there an e-mail I can reach you @ as I am completely DEAF
    & I want to program my Clarity XLC 3.4 to say:
    YOU HAVE RACHED 306-565-88​59 Please Leave An E-Mail @

    cjbear5​8@hotmail.​com

    Pleas​e E-Mail me & tell me if it is possible to program my Clarity cordless phone to the above effect. My husband just died & their
    is nobody to answer the phone. I NEED HELP IMMEDIATEL​Y!
    RSVP via E-Mail Carma Stewart
  • CARMA STEWART Aug 08, 2016 11:33:
    Is thre an e-mail I can reach you @ because I want to set my Clarity XLC 3.4 up, so that callers will get a recording saying:
    YO​U HAVE REACHED 306-56-885​9 PLEASE E-MAIL me @
    cjbear58​@hotmail.c​om
    Please e-mail me & tell me if it is possible to program my Clarity
    co​rdless phone to that effect. I am now, Completely DEAF & my
    husband just died, so their is nobody who can answer the phone.
    RSV​P CARMA STEWART
    I NEED HELP IMMEDIATEL​Y!
  • PHILLIPP QUEDENS Nov 19, 2015 03:02:
    THIS PHONE IS TERRIBLE THERE ARE 13 BUTTONS PLUS A VOLUME CONTROL IN ADDITION TO 12 KEYBOARD BUTTONS. THE PHONE RINGS FOR NO REASON, AND IF SMEONE CALLS I NEED TO TURN THE VOLUME TO MAX AND IT IS STILL DIFFICULT TO HEAR.I DISLIKE IT SO MUCH THAT I HOOKED UP MY 15 YEAR OLD SET SO I CAN DISCONNECT IT. I REFUSE TO PAY FOR A MANUAL. I NRVER GOT ONE