Clock Setting - Kenwood K23GSS11 Instruction Manual

clock setting

When the microwave is connected to the mains power, the LED display will show "0:00", and the
microwave will sound once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the clock/kitchen timer button. The
hour digit will flash and the clock indicator
will illuminate.
2. Turn the timer/weight/auto menu dial to
adjust the hour digit. The input time has to
be within 0-23.
3. Press the clock/kitchen timer button and
the minute digits will flash.
4. Turn the timer/weight/auto menu dial to
adjust the minute digits, the input time has
to be within 0-59.
5. Press the clock/kitchen timer button again
to complete the clock setting.
":" will start flashing and the time will
illuminate.
• In the process of clock setting, if
the stop/clear button is pressed
or if there is no operation within 1
minute, the microwave will go back
to the previous status automatically.
• If the clock needs to be reset,
please repeat steps 1 to 5.
• To find out the current time while
the microwave is operating, press
the clock/kitchen timer button. It
will last for 2-3 seconds and then
return to its original display.
12
K23GSS11_IB_final110304.indd 12
microwave/ weight/
grill/combination time defrost
clock/
stop/clear
kitchen timer
1, 3,
5
start/
+30sec/con rm
2, 4
04/03/2011 9:29 AM