Front Position (With Infant Seat) - manduca baby carrier Instructions For Use Manual

IS YOUR CHILD YOUNGER THAN
THREE MONTHS?
> FRONT POSITION
1)
Sit down and lay out the back panel of the carrier flat over
your lap. Fold out the infant seat and extend the back panel
of the manduca carrier by unzipping the back extension.
If your baby is still very small,
use the upper snaps.
If he/she is a bit bigger,
use the lower snaps.
ATTENTION: The infant seat
is only intended for positioning
your baby. It is not constructed
to hold your baby's weight. For
that reason always keep the
waistbelt closed!
WITH INFANT SEAT
3)
Then fasten the snaps. Support your child's head
and bring him/her close to your chest. Now stand
up carefully. Take care that the child's feet are not
squeezed between the waist belt and your body.
2)
Lay your child down on the back panel – his/her
bottom should be very close to your body – and
pull out the back panel under your child such that
the upper edge is situated on the back of your
child's head. Position the infant seat between your
child's legs.
Continue with
> Front position standard,
page 4, fi g. 3
7