Audio Setup
A user may select audio menu according to a user's speaker set.
1
2
3
52
While in STOP or RESUME STOP mode,
press [SETUP] button.
Select a Digital Output.
Set audio output to coaxial or optical. You
can set the outgoing digital signal to
BITSTREAM or LPCM:
• BITSTREAM : The raw audio signal
recorded on the disc goes to the digital
audio output.
• LPCM : The decoded audio signal goes
to the digital audio output.
Select a Dynamic Range.
You can set the Dynamic Range as follows:
• Off : You can hear the sound as it was
originally recorded on the disc.
• Full : You can hear loud sounds softer
and soft sounds louder.
DIGITAL OUT
BITSTREAM
DYNAMIC RANGE
OFF
DIGITAL OUT
BITSTREAM
DYNAMIC RANGE
LPCM
DIGITAL OUT
DYNAMIC RANGE
FULL
OFF