Uninstalling The Software - JVC VU-V101 Instructions Manual

FLOPPY DISK ADAPTER VU-V101

4. Uninstalling the Software

Before you begin uninstalling the software
Follow the steps below to shut down the FlashPath status monitoring
program. The FlashPath files will not be removed correctly unless this
program is shut down.
1 Click on the FlashPath Status icon in the taskbar.
(See P.20 for a description of the FlashPath
Status icon.)
2 When the FlashPath Status Monitor window
opens, click on the icon in the top left corner and
then click on Close.
Uninstallation procedure
Follow the steps below to remove the files installed on your PC.
Click on Start → Programs→ FlashPath →
1
FlashPath Uninstall.
Follow the instructions shown at the top of the
2
screen to remove the software.
The window below appears when the software removal is
complete.
Click on the OK button and restart your PC.
3
NOTE
16
You must restart your PC to erase all of the software,
which was uninstalled with the above operations, from
the PC's memory.