Table of Contents
Advertisement
PROTECTION
You can protect the HDD and a DVD-RAM/DVD-RW (VR-mode) in order to prevent recorded
images from being erased or edited by mistake. Further recording will not be possible on protected
disc until the protection is released.
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Use the
/
/
/
choose "Protect HDD"or "Protect DVD" on
the "HDD setting" or "DVD Setting" menu
screen, and then press the
4
The screen for verifying protection will
appear:
Choose "YES", and then press the
button.
Choose "NO" to cancel protection.
After "YES" or "NO" setting, the Disc
Navigation screen will be restored.
VERIFYING REMAINING FREE SPACE ON DISC OR CARD (CAPACITY)
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Use the
/
/
/
choose "Capacity" on the "HDD Setting",
"DVD Setting" or "Card" menu screen, and
then press the
button.
(When using HDD/
DVD)
Cap a c i t y
A p p r o x .
V I DEO( X T R A ) : 17m i n
*1
V I DEO( F I N E ) : 26m i n
V I DEO( S T D) : 54m i n
Cap a c i t y
: 9 0%
RETURN
*1 With DVD-RW (VF-mode)/DVD-R: The quality
mode first used for recording with disc will appear.
Note
• To release protection, perform steps 1-3: The screen
for verifying the release of protection will appear.
Choose "YES" to release the protection.
• If disc protection has been engaged on another
/
buttons to
device, it may not be releasable on this DVD video
camera/recorder: Use the original device that
protected the disc to release the protection.
button.
HDD
HDD
4
Press the
The Disc Navigation screen will be restored.
/
buttons to
Note
If the HDD is protected, or a write-protected disc or
locked card is used, the remaining space will always be
displayed as "0".
(When using card)
Cap a c i t y
A p p r o x .
PHOTO( F I N E ) : 4 6 2
PHOTO( NORM) : 9 2 4
PHOTO( ECO)
: 1 8 4 8
Cap a c i t y
: 9 6%
RETURN
HDD
HDD
:
button to quit.
:
105
Advertisement
Table of Contents
