Table of Contents
Advertisement
Operation
60 Receive Channels
The UH078SX-NB also has 60 receive only channels (CH81 - CH140)
which can be programmed with frequencies ranging from 450-512MHz
(in 12.5kHz steps). If you know the frequency you may store it manually.
Manual Programming
Turn power off. Press and hold
power back on. The channel indicator flashes the
lowest available empty channel. You may use the
or
to select another channel.
MENU
Press
. The frequency indicator flashes the
MHz whole number value to be set.
Press
or
number value (between 450 and 512 MHz).
Press
or
to move left or right between the
MHz whole number and the MHz decimal value
(in 12.5kHz steps) and press
change values.
When finished press
flashes.
Press
or
MENU
and hold
A confirmation tone sounds. The channel is automatically entered into
the OS scan memory.
Deleting a Programmed Receive Channel
Follow the steps in Manual Programming to enter a frequency for a
desired channel.
Select 0 for the first frequency digit and then press
Press
or
to exit programming mode.
UNIDEN UH078SX-NB
MENU
to select the MHz whole
MENU
, the channel indictor
to select the next channel for programming or press
to store setting.
to select another channel or press and hold
while turning
or
to
21
Handheld UHF-CB Transceiver
MENU
.
MENU
Advertisement
Table of Contents
