Introduction - Tektronix PG 508 Instruction Manual

Scope
This manual describes Pulse Generator AN/USM-
359A and provides instructions for operation and
maintenance. Throughout
1178/USM-359A is referred to as Tektronix Model PG
508 and PP-7578/USM 359A is referred to as TM 503.
Indexes of Publications
a. DA Pam 310-4. Refer to the latest issue of DA
Pam 310-4 to determine whether there are New
editions, changes, or additional publications pertaining
to the equipment.
b. DA Pam 310-7. Refer to DA Pam 310-7 to
determine whether there are modification work orders
(MWO's) pertaining to the equipment.
Maintenance Forms, Records, and Reports
Reports of Maintenance
Equipment. Department of the Army forms and
procedures used for equipment maintenance will be
those prescribed by TM 38-750, The Army Maintenance
Management system (Army).
b. Report of Item and Packaging Discrepancies. Fill
out and forward SF 364 [Report of Discrepancy (ROD)]
as prescribed
4140.55/NAVMATINS4355.73/AFR
4430.3E.
this manual, the
and Unsatisfactory
in AR 735-11-2/DLAR
400-54/MCO
SECTION O

INTRODUCTION

c. Discrepancy in Shipment Report (DISREP) (SF
361). Fill out and forward Discrepancy in Shipment
Report (DISREP) (SF 361) as prescribed in AR 55-38/
NA.VSUPI NST 4610.33B/AFR 75-18/MCO P4610.19C
SG-
and DLAR 4500.15.
Reporting
Recommendations (EIR)
If your AN/USM-359A needs improvement, let us
know. Send us an EIR. You, the user, are the only one
who can tell us what you don't like about your
equipment. Let us know why you don't like the design.
Tell us why a procedure is hard to perform. Put it on an
SF 368 (Quality Deficiency Report). Mail it to
Commander, US Army Communications and Electronics
Materiel Readiness Command, ATTN: DRSEL-ME-MO,
Fort Monmouth, New Jersey 07703. We'll send you a
reply.
Administrative Storage
To prepare the equipment for administrative
storage, ascertain its operability and reliability. In
addition, use the proper packing materials.
Destruction of Army Electronics Materiel
Destruction of Army electronics materiel to prevent
enemy use shall be in accordance with TM 750-244-2.
0-1
TM 11-6625-2980-14
Equipment Improvement