Download Print this page

Nokia NWSP Assembly Instructions Manual page 11

Wrist attached sensor platform
Hide thumbs

Advertisement

Copyright © 2008 Nokia Corporation
Figure 10 Double sided foam tape supports for LCD display added to the electronics assembly. (Ignore
everything else in this picture, as it is showing the development unit.)
The LCD has been attched to the platform in Figure 9. First snap the LCD connector in place and then
lower the LCD to the double sided tape supports. Because it is not possible to adjust the position of the
display after it has been taped, the connector must be connected before the display touches the tape.
NWSP Wrist Unit
Assembly Instructions
Tom Ahola 2008-05-15
11 (12)

Advertisement

loading

  Related Manuals for Nokia NWSP