NEC Univerge SV8100 DT310 User Manual page 61

Using the Headset with Automatic Answer for
ACD Agents:
1. With the multiline terminal in an idle state, press the
Feature key.
2. Press the HEADSET key (Service Code 751: 05).
Note: The Headset key blinks when Automatic Headset is
activated.
Note:
To cancel Automatic Headset, repeat these steps.
Station Speed Dial – Dial Access
To store a Station Speed Dialing number (display
telephones only):
1. Press the Speaker key.
2. Dial 755.
3. Dial the Station Speed Dial buffer number to be
programmed (0~9).
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2
:
:
0 = Station Speed Dial buffer 10
4. Dial the Access Code (e.g., 9) – if required.
5. Dial telephone number you want to store (up to 24
digits).
Note:
Valid entries are 0~9, # and *. To enter a pause,
press MIC. To store a Flash, press Recall.
6. Press Hold.
7. Enter the name associated with the Speed Dialing
number (display telephones only):
53