Download Print this page

Honda 35CC LITE Owner's Manual

Ice augers.
Hide thumbs
   

Advertisement

H
onda
It is recommended that everyone
who uses this product should read
this StrikeMaster Owner's Manual.
35
TM
Owner's Manual
ATTENTION: PRIOR TO FIRST USE
!
You MUST add crankcase oil to
your new Auger prior to your first use!
We recommend using the bottle of
StrikeMaster API rated SM (as a minimum)
OW-20 4-Cycle Synthetic Engine Oil included.
For longer life of the engine, continue to use the
required API rated SM (as a minimum) OW-20
4-Cycle Synthetic Engine Oil.
LITE
CC
For best performance, idle
engine for 1-2 minutes before
you start drilling.
!
SM13

Advertisement

   Related Manuals for Honda 35CC LITE

No related manuals

   Summary of Contents for Honda 35CC LITE

  • Page 1

    LITE onda Owner’s Manual ATTENTION: PRIOR TO FIRST USE It is recommended that everyone You MUST add crankcase oil to For best performance, idle your new Auger prior to your first use! who uses this product should read engine for 1-2 minutes before We recommend using the bottle of this StrikeMaster Owner’s Manual.

  • Page 2

    If removed, replacement of the green intake gasket is NOT covered under Honda or StrikeMaster limited warranties. For service contact your local authorized Honda Engine Dealer or visit www.strikemaster.com for more information by clicking the “Find Service Centers” button to search service centers by zip code.

  • Page 3

    9 of the Honda Owner’s Manual. The Honda (GX35 engine) is a non-application specific manual. Any further technical engine guidelines that are not covered in the StrikeMaster Owner’s Manual, refer to the Honda Owner’s Manual.

  • Page 4: Initial Assembly

    INITIAL ASSEMBLY Carefully remove blade Recommended to grease inside collar guard and make sure blade and transmission output shaft on the bolts are tight. Lazer Output Shaft powerhead. Insert auger onto output Blade shaft and install collar bolt. (8mm closed end wrench) Collar bolt inserts into the large hole, passes through the output shaft and Remove metric allen wrench...

  • Page 5

    Company warrants that Product, other than engines and parts subject to wear and tear, will perform substantially in accordance with the accompanying written materials [owner’s manual] for a period of ONE YEAR. In the case of Honda engines, the warranty period duration is a period of 24 months for private residential use and 12 months for commercial/rental/institutional use.

Comments to this Manuals

Symbols: 0
Latest comments: