Basic Operations; Turning On And Off; Choosing Tv Channel; Selecting Input Source - RCA 26LA30RQD User Manual

Basic Operations

Turning On and Off

Connect the AC cord to power the LCD TV. At this time the TV will enter standby mode and power indicator will turn red.
Use Power button ( ) on the top panel of TV or on the remote control to turn on the TV. After switching off the TV for 5 seconds,
you can turn on TV again.

Choosing TV Channel

Tuning To Analog Channels
An analog channel has a channel number beginning with "A". Input the digital number with numeric buttons directly and press
ENTER button to confirm.
For example, to watch analog channel "A51", press "5", "1", "ENTER" on remote control in sequence.
Note: Although there is no analog TV signal available in America, we reserve ATV functions for some expansible use.
Tuning To Digital Channels
A digital channel has a channel number beginning with "D". Input the main digital number with numeric buttons directly, then press
" " button on remote control, and input the sub number at last.
For example, to watch analog channel "D31-1", press "3", "1", "
Changing Channels Directly
You can use CH button to increase channel number and CH
is used, the up/down arrows can also work as CH /CH

Selecting Input Source

Source Select
TV
AV
Component
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
DVD

Adjusting TV Stand Angle

Press INPUT button on remote control to display Source Select list.
Use up/down arrows to highlight the source you need and press ENTER to confirm.
The TV cabinet can manually adjust to left or right for 30 degrees from the center.
You can adjust the angle for the best viewing effect and comfort.
", "1", "ENTER" on remote control in sequence.
to decrease channel number. When no OSD (On Screen Display)
buttons.
21