Sony STR-DA5200ES Service Manual page 13

Remote commander
You can use the supplied remote RM-AAL005 to operate
the receiver and to control the Sony audio/video
components that the remote is assigned to operate.
RM-AAL005
Name Function
A AV ?/1 (on/ Press to turn on or off the audio/video
components that the remote is assigned to
standby)
operate.
If you press the ?/1 (B) at the same time,
it will turn off the receiver and other Sony
components (SYSTEM STANDBY).
Note
The function of the AV ?/1 switchchanges
automatically each time youpress the input
button (C).
Press to turn the receiver on or off.
B ?/1 (on/
If ZONE 2 or ZONE 3 is selected, only the
standby)
main receiver is turned on oroff with this
button. To turn off all components
including an amplifier in zone 2 or zone 3,
press ?/1 and AV ?/1 (A) at the same
same time (SYSTEM STANDBY).
C Input Press one of the buttons to select the
component you want to use.
buttons
Press a pink-labeled button after pressing
SHIFT (wj). When you press any of the
input buttons, the receiver turns on.
The buttons are factory assigned to control
Sony components. You can program the
remote to to control non-Sony components
following the steps in "Programming the
remote".
D RECEIVER Press to enable the receiver operation.
E ZONE 2 Press to enable the zone 2/zone 3
operation.
ZONE 3
Name Function
F PIP
Press SHIFT (wj), then press PIP toswitch
the image of the PIP (Picture in Picture)
window.
The image will be changed as follows.
EXT VIDEO t ZONE 2 VIDEO t
OFF. You canalso change the size of the
PIP window by pressing V/v.
Note
The HDMI video signals are not output
while the PIP window is displayed.
MUSIC Press to select sound field.
G RESOLUTION
Press SHIFT (wj) then press
RESOLUTION repeatedly to change the
resolution of signals output from the
HDMI OUT or COMPONENT
VIDEO MONITOR OUT jack.
MOVIE Press to select sound field.
H Numeric
Press to
− preset/tune to preset stations.
buttons
− select track numbers of the CD player,
DVD player or MD deck. Press 0/10 to
select track number 10.
− select channel numbers of the VCR or
satellite tuner.
− After pressing TV (wk), press the
numeric buttons to select the TV
channels.
I ENTER
Press to enter the value after selecting a
channel, disc or track using the numeric
buttons.
MEMORY Press to store a station during tuner
operation.
J DISPLAY
Press to select information displayed on the
display window, TV screen of the VCR,
satellite tuner, CD player, DVD player, or
MD deck.
K
After pressing MENU (qd) or TOP MENU
(qk), press V/v, B or b to select the
settings. Then press
V/v/B/b
selection.
L OPTIONS
Press to display and select items from option
menus for receiver and DVD player.
TOOLS Press to display and select items from option
menus for DVD player, etc.
M MENU
Press to display the menu of the
receiver of a DVD player, TV, etc.
N CATEGORY
Press to select the category for XM Radio.
+/–
ALBUM +/– Press to replay the previous scene or fast
forward the current scene of the VCR or
DVD player.
O m /M
Press to operate the DVD player, CD
x
player, MD deck or tape deck, etc.
X
b)
H
./>
CATEGORY
Press to select the category mode for XM
Radio.
MODE
TUNING +/– Press to selest station.
P PRESET
Press to register FM/AM/XM Radio
b)
+ /–
stations or to select preset stations.
TV CH +/ – Press TV (wk) and then press TV CH+/−
to operate the TV, satellite tuner, VCR, etc.
Q F1/F2
Press TV (wk) and then press F1 or F2 to
select a component to operate.
• HDD recorder
F1: HDD
F2: DVD
• DVD/VHS combo player
F1: DVD
F2: VHS
TV/VIDEO Press TV/VIDEO and TV (wk) atthe same
time to select the input signal (TV input or
video input).
WIDE Press to select the wide picture mode.
MACRO1,
Press RECEIVER (4) and then press
MACRO2 MACRO 1 or MACRO 2 to set up the
macro function.
Name
R TOP MENU
MENU
NIGHT
MODE
INPUT
MODE
S MUTING
T MASTER
b)
VOL + /–
TV VOL +/–
U DISC SKIP
V RETURN/
EXIT O
W ON SCREEN
X CLEAR
>10
to enter the
D.TUNING
Y A .DIRE CT
2CH
Z SLEEP
A.F.D
wj SHIFT
wk TV
wl RM SET UP
b)
The tactile dot is attached to these buttons (H, PRESET+).
Use as a mark of operation.
Notes
• Some functions explained in this section may not work
depending on the model.
• The above explanation is intended to serve as an example only.
Therefore, depending on the component, the above operation
may not be possible or may operate differently than described.
STR-DA5200ES
Function
Press to display the menu or on-screen
guide of the DVD player on the TV screen.
Then use V/v/B/b and to perform
menu operations.
Press to display the menus of the DVD
player on the TV screen. Then use
V/v/B/b and to perform a menu
operations.
Press RECEIVER (4) and then press
NIGHT MODE to activate the NIGHT
MODE function.
Press RECEIVER (4) and then press
INPUT MODE to select the input mode
when the same components are connected
to both digital and analog jacks.
Press to silence the sound.
Press to adjust the volume level of all
speakers at the same time.
Press TV (wk) and then press TV VOL +/−
to adjust the volume level of the TV.
Press to skip a disc when using a multi-disc
changer.
Press to return to the previous menu or exit
the menu while the menu or on-screen guide
of the VCR, DVD player, or satellite tuner
is displayed on the TV screen.
Press to turn the GUI display mode on or
off. Press MENU (qd) to display the menu
when "GUI ON" appears on the display.
Press to
− clear a mistake when you press the
incorrect numeric button.
− return to continuous playback, etc. of
the satellite tuner or DVD player.
Press to select
− track numbers over 10 of the VCR,
satellite tuner, CD player or MD deck.
− channel numbers of the Digital CATV
terminal.
Press to enter direct tuning mode.
Press SHIFT (wj) then press A.DIRECT
to switch the audio of the selected input to
analog signal without any adjustment.
Press to select sound filed.
Press SHIFT (wj) then press SLEEP to
activate the Sleep Timer function and the
duration which the receiver turns off
automatically.
Press to select sound filed.
Press to light up the button. It changes the
remote button function to activate the
buttons with pink printing.
Press to enable the TV operation.
Press to set up the remote.
13