Screen Settings - Sony XAV-60 Operating Instructions Manual

Item
RBE (Rear Bass Enhancer)
(page 36)
Uses rear speakers as a
subwoofer.
Crossover Filter
Selects the cut-off frequency
of the front/rear speakers
(HPF) and subwoofer (LPF).
4.1ch Speaker Level
(page 37)

Screen settings

Touch c "Screen" c the desired item c the desired option. For details on this procedure, see "Basic
setting operation" on page 39.
Follow the page reference for details. "z" indicates the default setting.
Item
Screen Select (page 37)
Picture EQ (page 38)
Aspect (page 38)
Clock
Shows/hides the clock display
in the bottom right corner of
the display.
Demo
Option Purpose
OFF (z), To select the mode.
RBE1, RBE2,
RBE3
LPF: 50 Hz,
To select the cut-off
60 Hz, 80 Hz,
frequency. (Available only
100 Hz (z),
when "Subwoofer" is set to
120 Hz
"ON.")
HPF: OFF (z) To not cut out the
frequency.
HPF: 50 Hz,
To select the cut-off
60 Hz, 80 Hz,
frequency.
100 Hz, 120 Hz
Subwoofer To select the subwoofer
Phase:
phase. (Available only
Normal (z),
when "Subwoofer" is set to
Reverse
"ON.")
– –
Option Purpose
–
–
Dynamic (z), To select the picture
Standard,
quality.
Theater, Sepia
Custom 1, To customize the picture
Custom 2
quality.
Full (z), To select the screen aspect
Normal,
ratio.
Wide,
Zoom
ON (z) To show the clock display.
OFF
To hide the clock display.
ON (z)
To activate the
demonstration.
OFF To deactivate the
demonstration.
Unit status
During reception/
playback.
During reception/
playback.
Unit off.
Unit status
Any status.
During video/
image playback.
During video/
image playback.
Any status.
Unit off.
43