Gs500K4/Fk4 ('04-Model) Front Fork Installation - Suzuki GS500E Service Manual

Motorcycle suzuki
Table of Contents

Advertisement

• Hold the front fork vertically and adjust the fork oil level with
the special tool.
' Front fork oil level: 110 mm (4.3 in)
& 09943-74111: Front fork oil level gauge
• Apply fork oil lightly to a new O-ring and install it to the front
fork cap bolt.
( 99000-99044-10G:
SUZUKI FORK OIL #10 or equivalent fork oil
• Temporarily tighten the cap bolt.
INSTALLATION
Installation is in the reverse order of removal. Pay attention to
the following points.
• When installing the front fork assembly, align the upper sur-
face A of the inner tube with the surface B of the steering
upper bracket.
• Tighten the front fork upper clamp bolt 1 to the specified tor-
que.
# Front fork upper clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Tighten the front fork lower clamp bolt 2 to the specified tor-
que.
# Front fork lower clamp bolt: 30 N·m (3.0 kgf-m, 21.5 lb-ft)
• Tighten the front fork cap bolt to the specified torque.
# Front fork cap bolt: 25 N·m (2.5 kgf-m, 18.0 lb-ft)
• Recheck that the surface A is flush with the surface B.
• Install the front fender and front wheel.
NOTE:
Before tightening the front fender brace mounting screws, move
the front forks up and down several times.
GS500K4/FK4 ('04-MODEL)
20-23

Advertisement

Table of Contents
loading

Table of Contents