Vesa Frames And Bottom Bracket Removal; Lcd Panel Removal - Sony KDL-40Z4100 Service Manual

1-7. VESA FRAMES AND BOTTOM BRACKET REMOVAL

1
Remove 4 screws from VESA Frames
2
Remove 4 screws
3
Remove 4 screws

1-8. LCD PANEL REMOVAL

1
Disconnect 2 connectors
2
Remove 3 screws (KDL-40Z4100/40Z4110 ONLY)
Remove 5 screws (KDL-46Z4100/46Z4110 ONLY)
NOTE: The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached
to the TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration on Page 32 for
KDL-40Z4100/40Z4110 models and on Page 52 for KDL-46Z4100/46Z4110 models.
KDL-40Z4100/40Z4110/46Z4100/46Z4110
1
2
KDL-40Z4100/40Z4110/46Z4100/46Z4110
3
LCD Panel
1
2
Bezel
16