JVC AV-20320 User Manual page 14

FV5 English 3/12/02
Connections
Cable and VCR Connections - Continued
Diagram #2
Illustration of AV-20320
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable box.
2) Connect an RF cable from the RF Output on the cable box, in to the RF Input on the back
of the VCR.
3) Connect an RF cable from the RF Output on the VCR, in to the RF Input on the back of the
TV.
• Please consult your VCR's owner's manual for more information on its operation.
• See page 15 for instructions on making stereo connections with your VCR (for television
models AV-20320, and AV-20321 only).
The connection diagrams are intended to show some basic connections. Some cable
companies may require special connections to properly use your television. If you fol-
low these diagrams and the television does not work properly, contact your local
cable operator for more connection information.
14
2:49 PM Page 14
INPUT
OUTPUT
VIDEO—
L/ MONO L
l
AUDIO
I
R R
OUT IN
75‰
(VHF/UHF) (VHF/UHF)
CABLE BOX
(Yellow)
IN (White)
(Red)
OUT
VCR