Before Install; Connect Usb Cable - Brother MFC-J432W Quick Start Manual

Hide thumbs Also See for MFC-J432W:
Table of Contents

Advertisement

USB
For USB interface users
17
Before you install
Make sure your machine is connected to the power
and your Macintosh is ON. You must be logged on
with Administrator rights.
Note
For Mac OS X 10.4.0 to 10.4.10 users, upgrade to
Mac OS X 10.4.11 - 10.6.x.
18
Connect the USB cable
IMPORTANT
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
• Connect the machine directly to your
Macintosh.
a
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
16
(Mac OS X 10.4.11, 10.5.x, 10.6.x)
b
c
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Macintosh
Connect the USB cable to the USB port
marked with a
symbol. You will find the
USB port inside the machine as shown below.
USB
Carefully guide the USB cable into the cable
channel and out the back of the machine.
Connect the cable to your Macintosh.
IMPORTANT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j430w

Table of Contents