KitchenAid FREESTANDING OUTDOOR GRILL Installation Instructions And Use & Care Manual page 17

Freestanding outdoor grill
Table of Contents

Advertisement

Available languages

Available languages

Change the Sear Burner Orifices
1. Remove the screw securing the igniter and the 2 searing side
burner screws.
2. Lift out the searing side burner.
3. Locate the Liquid propane orifice at the end of the valve.
A. Orifice
4. Use 6 mm socket wrench or 6 mm nut driver to remove the
orifice. Replace with the Natural gas orifice.
IMPORTANT: Check that the orifice is properly installed inside
of the valve.
5. Reinstall the searing side burner. Make sure that the igniter is
out of the way to allow proper positioning of burner. Use
Phillips screwdriver to attach the mounting screws.
6. Use Phillips screwdriver to reattach the igniter and searing
side burner plate.
7. Reinstall searing side burner cover. Use Phillips screwdriver
to attach mounting screws.
8. Open the manual shutoff valve in the gas supply line. The
valve is open when the handle is parallel to the gas pipe.
A
A. Orifice
A
B
A. Closed valve
B. Open valve
A
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

720-0745730-0745

Table of Contents