Samsung LDO19WS Service Manual page 11

10 Operating Instructions and Installation
1. POWER
Use this button to turn the monitor on and off.
2. Number button
Selects TV channels in the TV mode.
You may use this button in PIP mode as well.
3. +100
Press to select channels over 100.
For example, to select channel 121, press "+100",
then press "2" and "1".
-/-- (One/Two-Digit channel selection )
Use to select a channel numbered ten or over.
Press this button, and the "--" symbol is displayed.
Enter the two-digit channel number.
This function is available only in Europe.
4. - +
Adjusts the audio volume.
5. MUTE
Pauses (mutes) the audio output temporarily.
Displays on the lower left corner of the screen.
The audio resumes if mute or -
in the Mute mode.
6. TTX/MIX
TV channels provide written information services
via teletext.
This function is available only in Europe.
7. MENU
Use this button to open the on-screen menu and
exit from the menu screen or close screen
adjustment menu.
8. ENTER
Activates a highlighted menu item.
9. CH/P
In TV mode, selects TV channels.
10. SOURCE
Switches from PC Mode to Video mode.
Changing the source is allowed only in external
devices that are connected to the monitor at the
time.
11. INFO
Current picture information is displayed on the
upper left corner of the screen.
12. EXIT
Exits from the menu screen.
13. Up-Down Left-Right buttons
Moves from one menu item to another horizontally,
vertically or adjusts selected menu values.
10-6
14. AUTO - Available in PC Mode Only
Adjusts the screen display automatically.
15. P.MODE, M/B (MagicBright¢â)
When you press this button, current mode is
displayed on the lower center of the screen.
TV / AV / Ext. / S-Video /Component Mode :
P.MODE( Picture Mode )
The monitor has four automatic picture settings
that are preset at the factory.
Then push button again to circle through available
preconfigured modes.
( Dynamic ¡æ Standard ¡æ Movie ¡æ Custom )
PC / DVI Mode : M/B ( MagicBright¢â )
MagicBright¢â is a new feature providing the
optimum viewing environment depending on the
contents of the image you are watching.
Then push button again to circle through available
preconfigured modes.
( Entertain¡æ Internet ¡æ Text ¡æ Custom )
16. P.SIZE - Not available in PC/DVI Mode
+ is pressed Press to change the screen size.
(Auto Wide ¡æ Wide ¡æ Panorama ¡æ Zoom1 ¡æ
Zoom2 ¡æ 4:3)
Panorama, Zoom1, Zoom2 are not available in
1080i(or over 720p) of DTV.
17. STILL - Not available in PC/DVI/Component
Mode
Press the button once to freeze the screen. Press
it again to unfreeze.
18. PIP - Available in PC/DVI/Component Mode
Push the PIP button to turn PIP screen On/Off.
19. S.MODE ( Sound Mode )
When you press this button, current mode is
displayed on the lower center of the screen.
The monitor has a built-in high fidelity stereo
amplifier.
Then push button again to circle through available
preconfigured modes.
(Standard ¡æ Music ¡æ Movie ¡æ Speech ¡æ Custom)
20. DUAL / MTS
DUAL : STEREO/MONO, DUAL l / DUAL ll and
MONO/NICAM MONO/NICAM STEREO can be
operated depending on broadcasting type by using
DUAL button on the remote control while watching
TV.
MTS : You can select the MTS (Multichannel
Television Stereo) mode.
- Mono, Stereo, SAP (Separate Audio Program)
Set 'MTS' to ON to choose Mono, Stereo or SAP.