12.5.3
Horizontal Airflow
12.5.3.1
E12JKK-1
The horizontal airflow direction louvers can be adjusted manually by hand.
12.5.3.2
E18JKK-1
•
Automatic horizontal airflow direction can be set using remote control; the vane swings left and right within the
angles as stated below. For heating mode operation, the angle of the vane depends on the indoor heat
exchanger temperature as Figure 1 below.
•
Manual vertical airflow direction can be set using remote control; the angles of the vane are as stated below and
the positions of the vane are as figure below:
12.6
Quiet Operation (Cooling Mode/Cooling Area of Dry Mode)
•
Purpose
To provide quiet cooling operation compare to normal operation.
o
•
Control condition
Quiet operation start condition
o
When "Quiet" button at remote control is pressed.
Quiet LED illuminates.
Quiet operation stop condition
o
When one of the following conditions is satisfied, quiet operation stops:
•
Powerful button is pressed.
•
Stop by OFF/ON button.
•
OFF Timer activates.
•
Quiet button is pressed again.
52