JBL CS1500 Owner's Manual

Jbl model home theater system owner's manual
Hide thumbs Also See for CS1500:

Advertisement

CST55
CSS10
CSB5
CSC55
®
JBL CINEMA SOUND
CST55, CSB5, CSC55,
CSS10
OWNER'S GUIDE

Advertisement

Table of Contents
loading

Summary of Contents for JBL CS1500

  • Page 1 CST55 CSS10 CSB5 CSC55 ® JBL CINEMA SOUND ™ CST55, CSB5, CSC55, CSS10 OWNER’S GUIDE...
  • Page 2: Read First

    READ FIRST! 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  • Page 3 THANK YOU FOR CHOOSING JBL For more than 60 years, JBL has been involved in every aspect of music and film recording and reproduction, from live performances to the recordings you play in your home, car or office. We’re confident that the JBL...
  • Page 4: Speaker Placement

    It is often convenient to set the center speaker on top of the television set, as shown in the drawing. The JBL Cinema Sound speaker system may be used in 5.1-, 6.1- or 7.1-channel applications. In 5.1-channel applications, two of the...
  • Page 5 WALL-MOUNTING THE CSC55 AND CSB5 The CSC55 center channel and the CSB5 are designed to be mounted on the wall. There are two (2) fixed-mount wall brackets provided for the CSC55, and one for the CSB5. Each speaker bracket will require up to three 1-1/2"...
  • Page 6: Speaker Connections

    (+) and (–) terminals. Most manufacturers of speakers and electronics, including JBL, use red to denote the (+) terminal and black to denote the (–) terminal. The (+) lead of the speaker wire is noted with a stripe.
  • Page 7 DOLBY ® DIGITAL OR DTS (OR OTHER DIGITAL SURROUND MODE) CONNECTION RECEIVER SUBWOOFER LINE LFE OUT LEVEL Use this installation method for Dolby Digital, DTS or other digital surround processors: Use the line-level input jack marked “LFE” for the Low- Frequency Effects channel.
  • Page 8: Subwoofer Operation

    SUBWOOFER OPERATION Press the Master Power switch (marked “Power” a) to the On position to use the subwoofer. The CSS10 subwoofer will automatically turn on or go into standby (sleep) mode as described below. When your receiver or amplifier is off, or is not sending program material to the subwoofer, the subwoofer will be in standby...
  • Page 9: Troubleshooting

    If the problem has followed the speaker, consult your dealer for further assistance or, if that is not possible, visit www.jbl.com. If there is no sound from the center speaker: • Check all wires and connections between receiver/ amplifier and speaker.
  • Page 10: Specifications

    338 x 155 x 130mm (13-5/16" x 6-1/8" x 5-1/8") Weight 2kg (4.5 lb) PRO SOUND COMES HOME JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 USA ® 8500 Balboa Boulevard, Northridge, CA 91329 USA 2, route de Tours, 72500 Chateau du Loir, France 516.255.4JBL (4525) (USA only) www.jbl.com...

Table of Contents