Suzuki GS500/F Service Manual: Wiring Harness And Hose Routing; Wiring Harness Routing

Gs500/f.
Hide thumbs

Advertisement

WIRING HARNESS AND HOSE ROUTING

WIRING HARNESS ROUTING
Clamp
Wiring harness
Rear turn signal
light (LH)
Clamp
Wiring harness
Neutral switch
Regulator
(Pass the regulator
lead wire under
the wiring harness) Clamp the wiring harness at
Clamp
Regulator
Pass the turn signal
light lead wire between
the frame and rear fender.
No slack.
Side stand relay
Pass the lead wire
underneath the frame.
Neutral
switch
coupler
Battery
+ lead
wire
blue tape on the wiring harness.
Clamp
Keep clearance between the regulator
lead wire and helmet holder.
No slack
Starter relay
Clamp
Side stand switch
coupler must be located
over the starter relay
coupler.
Turn signal relay
Rear brake light switch
Clamp
Ignition coil lead wire
Clutch cable
Throttle cable
Do not allow the
wiring harness to
contact with the
fuel tank bracket bolt.
Clamp
Starter motor
Side-stand switch
Neutral switch
Clamp
Clamp
Rear brake
Clamp
light switch
TPS
Solenoid
Air cleaner box
Clamp
GS500K4/FK4 ('04-MODEL)
Ignition coil (LH)
Clamp
Ignition coil (RH)
Spark plug cap
For GS500/U
Pass the combination
meter lead wire above
the handlebar switch
lead wires.
A
Pass the solenoid lead wire
between the air cleaner box
and solenoid.
Side-stand switch
27
B

Advertisement

   Also See for Suzuki GS500/F

Comments to this Manuals

Symbols: 0
Latest comments:
  • Walter ocampo Jul 06, 2015 01:47:
    exelente pagina es muy util para aclarar dudas de mecanica