Page 1
413 West Elm Street Operator Manual Sycamore, IL 60178 Service: (815)-899-0801 Xpress XCPRO-80 Charging Toll Free: (866)-883-TEST (8378) The Xpress XCPRO-80 is the ultimate battery charger with fast charge www.autometer.com/test and full charge options for the professional. 2650-1635-00 Rev. A 8/30/12...
LIMITED WARRANTY CONGRATULATIONS! You have purchased Auto Meter’s XCPRO-80 system designed to automatically provide a fast charge or full charge when needed. The system is fully automated with LCD readout for menu 12 MONTHS FROM DATE OF PURCHASE instructions, charge results, and LED lights for unattended distance...
CARE AND MAINTENANCE CONTENTS Keep leads free of oil. Clean with warm, soapy water. Never insert an object into the fan vents. This can cause electrical and/or mechanical damage. Never cover the fan vents. Never attempt to open up or repair the tester. Repairs should only be done by an authorized repair center.
Page 4
ABOUT THE XCPRO-80 at a time. Connection to 24 volts will dangerously overload the circuitry. Do not charge multiple batteries or 24 volt systems using the XCPRO-80. Select ABOUT from the main menu. The following is displayed. Warning! Never attach the XCPRO-80 to a battery that is connected to any other tester or charging unit.
Page 5
A damaged battery must be replaced before proceeding. USE+/- particular amount such as 600 CCA. Y TO SELECT PRINT OPTIONS If the XCPRO-80 is connected to a POSI-160 interface that has a printer, NO PRINTING you may chose "PRINT TO POSI" to be USE +/-.
Page 6
'N' TO STOP. The XCPRO-80 will automatically charge a 6V, 8V or 12V battery in a Fast Charge mode or Full Charge mode. Fast Charge Mode: Quickly charges the battery up to a level that it can be put back into service, and the remaining charge will be put back into the battery by the vehicles charging system.
Y Enter Key: This key selects the main or next USB Port on the left side. If the XCPRO-80 determines a low >WHAT IS RATED menu. It also selects the cursor USB B Connection - Future expansion...
Page 8
HOOK UP CHARGE SEQUENCE From the menu select CHARGE using the +/- keys. Turn on the AC switch. The LCD will indicate "XCPRO-80" if the unit is properly plugged into an AC outlet. For your safety, make sure >CHARGE the AC receptacle is properly grounded.
Need help?
Do you have a question about the XCPRO-80 and is the answer not in the manual?
Questions and answers