Magic Remote Control Functions; Battery Installation - LG BP740 Owner's Manual

Magic remote control
functions
The Magic remote control operates by pairing with
your unit. Once you purchased the unit, please
register the Magic remote control as follows;
To register the Magic remote control
WHEEL
To use the Magic remote control, register it with
your unit first.
1. Turn on the unit and wait for about 10 seconds
and then press and hold Wheel (a) button
while pointing the remote control at the unit.
2. The remote control is automatically registered
and a registration completion message appears
on the screen.
,
Note
If you failed to register the Magic remote
control, turn off the unit and try again.

Battery Installation

Open the battery cover at the bottom of the
Remote Control, and insert two (1.5 V AA ) alkaline
batteries with 4 and 5 matched correctly.
>
Caution
Do not mix old and new batteries, as this may
damage the remote control.
How to use Magic remote control
y Shake the remote control slightly to make the
pointer appear on the screen.
y Shake the Magic remote control slightly to the
right and left to make the pointer appear on the
centre of screen.
y The magic pointer disappears when the remote
control is not moved for five seconds.
How to use Magic remote tip
y When you press the wheel, it also functions as
Selection button.
y You can scroll through menus using the wheel.
y Use your wrist to move the pointer more easily.
,
Note
y If the Magic remote control's connection is
unstable or has any problems, cancel the
registration and try it again. (page 60)
y Depending on the content, the pointing of
the magic remote control does not work.
For controlling, please use the direction keys
on the remote.
Getting Started 11
1