How do I reset my GE universal remote?

You can reset your GE universal remote by removing the batteries. You have up to 10 minutes to change the batteries without losing programmed codes. However, if any buttons are pressed while the batteries are out of the remote, all codes will be lost once batteries are reinstalled, effectively resetting the remote. For more information, see page 3 of the manual.

Why is my GE universal remote not working?

If your GE universal remote is not operating your product, consider the following:Ensure you have pressed the mode button corresponding to the product you want to control.The remote may need to be reprogrammed with a new code.You might need to install new batteries. Note that you may have to reprogram your remote after installing new batteries.The remote may not be compatible with your product. For more information, see page 14 of the manual.

How do I find a programming code for my GE universal remote?

You can find programming codes for your GE universal remote in the code tables provided on a separate sheet. Additionally, you can use the Code Identification Feature to find a 4-digit library code already stored under a device key on your remote:Press and hold the CODE SEARCH button until the red indicator stays on, then release it.Press and release the desired mode button (TV, VCR, etc.). The red indicator will blink, then stay lit.Press and release the CODE SEARCH button again. The red indicator will blink once and remain lit.To find the first digit, press each numeric key from 0-9 in turn. The number that causes the indicator light to blink is the first digit.Repeat step 4 to find the second digit (the indicator blinks off when found).Repeat step 4 to find the third and fourth digits.

How do I program my GE universal remote for a TV?

You can program your GE universal remote for a TV using either the Direct Code Entry or Code Search methods. Note that you can only store TV codes under the TV button. Direct Code Entry:Press and hold the CODE SEARCH button until the red indicator stays on, then release it.Press and release the TV mode button. The red indicator will blink, then stay lit.Enter the 4-digit code for your TV from the code tables.With your TV on, press ON-OFF. If the TV turns off, programming is complete.Code Search: Manually turn on your TV. Press and hold the CODE SEARCH button until the red indicator stays on, then release it. Press and quickly release the TV mode button. The red indicator will blink off once. Press the ON-OFF button repeatedly until your TV turns off. Press and release ENTER to install the code.

Why did my GE universal remote suddenly stop working?

If your GE universal remote suddenly stopped working, consider the following:Ensure you have pressed the mode button corresponding to the product you want to control.The remote may need to be reprogrammed with a new code.You might need to install new batteries. Note that you may have to reprogram your remote after installing new batteries.The remote may not be compatible with your product. For more information, see page 14 of the manual.

What steps can I take if my GE universal remote is not responding to any of my devices?

If your GE universal remote is not responding to any of your devices, follow these steps:Ensure you have pressed the mode button of the product you want to control (e.g., TV, VCR).Program the remote with a new code for your device.Install new batteries. You might need to reprogram the remote after replacing batteries.Confirm that the remote is compatible with your product. For more information, see page 14 of the manual.

How can I program my GE universal remote for a DVD player?

You can program your GE universal remote for a DVD player using either the Direct Code Entry or Code Search methods. When programming, you can store a DVD code under the VCR button or any other mode button except TV. Direct Code Entry:Press and hold the CODE SEARCH button until the red indicator stays on, then release it.Press and release the VCR mode button (or other desired mode button). The red indicator will blink, then stay lit.Enter the 4-digit code for your DVD player from the code tables.With your DVD player on, press ON-OFF. If the device turns off, programming is complete.Code Search: Manually turn on your DVD player. Press and hold the CODE SEARCH button until the red indicator stays on, then release it. Press and quickly release the VCR mode button (or other desired mode button). The red indicator will blink off once. Press the ON-OFF button repeatedly until your DVD player turns off. Press and release ENTER to install the code.

How do I reset my GE universal remote without a code?

To reset your GE universal remote without a code, remove the batteries. If buttons are pressed while the batteries are out, all codes will be lost when new batteries are installed. This effectively clears all programmed codes.

What should I do if my GE universal remote isn't programming correctly?

If your GE universal remote isn't programming correctly, indicated by the red indicator blinking after you program a product code, it means the remote did not accept the code. In this case, you should try to program the code again or try a different code for your device. For more information, see page 14 of the manual.

What should I do if individual buttons on my GE universal remote are not working?

If individual buttons on your GE universal remote are not working, it may be because the particular code you used only operates some features of your product, or the remote may not be able to operate all features. You should try programming the remote with a new code to see if a different code provides more complete functionality. For more information, see page 14 of the manual.

How do I switch between different devices after programming my GE universal remote?

After programming your GE universal remote, you can switch between different devices by pressing the corresponding mode button for the product you wish to operate (e.g., TV, VCR, DVD, CBL/SAT, AUDIO, AUX).

Why is the indicator light on my GE universal remote not illuminating?

The red indicator light on your GE universal remote should light up when any button is pressed. If it is not illuminating, it suggests a power issue. You should install new batteries in the remote.

What types of devices are compatible with the GE RM24918 universal remote?

The GE RM24918 universal remote is compatible with devices corresponding to its mode buttons, which include: TV, VCR, DVD, CBL/SAT, AUDIO, and AUX.

How can I confirm if my GE universal remote has been programmed successfully?

After programming, you can confirm success by testing the remote with your device:For Direct Code Entry: With your device on, press the ON-OFF button. If the device turns off, no further programming is required.For Code Search: After repeatedly pressing ON-OFF until your device turns off, press ENTER to install the code. If the device responds to commands, the programming was successful.

How many devices can the GE RM24918 universal remote control simultaneously?

The GE RM24918 universal remote is designed to control up to six different types of devices, as indicated by its dedicated mode buttons: TV, VCR, DVD, CBL/SAT, AUDIO, and AUX. For more information, see pages 4 and 8 of the manual.