Table of Contents
Advertisement
Section 4–Device Discovery and Addressing
4.2 Addressing
1. If desired, these devices can be manually readdressed by the user. It is important to
note that if manual addressing is performed, the 'Find Device' search function will
automatically clear all manually specified addresses to '0' and then readdress each
device by the order they respond.
To manually readdress a device, select the device and go to 'Tools, Addressing . . .' from
the main menu, located at the top of the main screen (Figure 4-5).
1. Click on device to be readdressed.
2. Go to 'Tools, Addressing'.
2. From the 'Manual Addressing' dialog
box, click 'Remove Device'. This will
clear the assigned address for that
serial number (Figure 4-6).
4-4
Figure 4-5. Selecting 'Addressing' from the Main Menu.
ATC200-Lite Teletilt
Figure 4-6. Removing Device.
May 2005
Remote Control Downtilt System
®
Click 'Remove Device'.
Bulletin 639510
Advertisement
Table of Contents
