Brother MFC-J4510DW Quick Start Manual page 21

Hide thumbs Also See for MFC-J4510DW:
Table of Contents

Advertisement

For Wireless Network Users
i
Enter the Network Key you wrote down on
page 19, and then click Next.
NOTE
If your network is not configured for
Authentication and Encryption, the following
screen will appear. To continue configuration,
click OK and go to j.
j
Click Next. The settings will be sent to your
machine.
NOTE
• The settings will remain unchanged if you click
Cancel.
• If you want to manually enter the IP address
settings of your machine, click Change IP
Address and enter the necessary IP address
settings for your network.
• If the wireless setup failure screen appears,
click Retry.
k
Disconnect the USB cable between the
computer and the machine.
l
Click Next to continue to install MFL-Pro Suite.
Wireless setup is now complete. The
Wi-Fi button at the upper right of the
Touchscreen changes to a four-level
indicator that displays the wireless signal
strength of your access point/router.
The Wi-Fi LED
lights up, indicating that the machine's
Network I/F is set to WLAN.
To install MFL-Pro Suite
®
For Windows
users:
Now go to
Step 20-e on page 23
For Macintosh users:
Now go to
Step 20-d on page 25
on the control panel
21

Advertisement

Table of Contents
loading

Table of Contents