Installation - GE 98068 User Manual

Installation

Please note that you must install the camera's driver BEFORE you
connect the camera to the USB port of your computer.
1. Install all relevant updates, service packs, and patches for your operating system.
These are available on Microsoft's® website under "Resources". Use the
"Windows Update" link. (www.microsoft.com).
2. Insert the included 98068 EasyCam™ Twin CD into the CD Rom Drive of your
computer. (The CD should auto load).
3. If CD does not auto load, follow these steps:
a.
Double click on My Computer
b.
Double click on the CD icon of the CD drive (Usually D:\)
c.
Double click on setup.exe
4. The installation menu will come up. Select EasyCam™ Twin 98068 Driver.
5. Select Next on the Welcome screen.
6. Select the Complete set up type, and then Next to continue.
7. Select Install to begin copying the driver files to your computer.
8. On the final screen, select Finish.
9. (Optional) On the installation menu, select ArcSoft VideoImpression™ if desired.
Follow the on-screen instructions to complete the installation. DirectX® may install
as well. Please follow the instructions to complete the installation. You may need to
reboot your computer.
10. (Optional) On the installation menu, select ArcSoft PhotoImpression™ if desired.
Follow the on-screen instructions to complete the installation. You may need to
reboot your computer.
Page 6