Janome MEMORY CRAFT 4900 QC Instruction Book page 42

c
q
v
w
e
r
t
u
t
y
i
c Pull the buttonhole lever down as far as it will go.
q Buttonhole lever
NOTE:
If you start sewing without pulling down the buttonhole lever,
the LCD screen will show a warning and the machine will
stop after a few stitches. Pull the buttonhole lever down and
restart the machine.
v Insert the corner of the fabric under the foot. Press
the up/down needle button twice.
Remove the fabric to the left to draw the needle
thread through the hole of the foot.
Place the garment under the foot, and lower the
needle at the starting point of the buttonhole mark.
Then lower the automatic buttonhole foot R.
w Buttonhole mark
e Needle thread
r Bobbin thread
t Starting point
NOTE:
Make sure there is no gap between the slider and front
stopper, otherwise the left and right lengths will be different.
y Slider
u Front stopper
i Sewing gap
4 0