Bobbin Winding - Janome MEMORY CRAFT 4900 QC Instruction Book

e
w
e
q
w
r

Bobbin Winding

• Removing the bobbin
q
w
q
q
1 8
q Hook cover plate release button
w Hook cover plate
e Bobbin
Slide the hook cover plate release button q to the right,
and remove the cover plate w.
Lift out the bobbin e from the bobbin holder.
• Setting the spool of thread
q Spool pin
w Large spool holder
e Small spool holder
r Spool stand
Lift up the spool pin q. Place a spool of thread on the
spool pin with the thread coming off the spool as shown.
Attach the large spool holder w, and press it firmly
against the spool of thread.
The small spool holder e is used with narrow or small
spools of thread.
If the thread slips off the spool and jams around the
spool pin, use the spool stand r.