Reminder Message On/Off; Ignoring Short Stitches; Setting The Trim Tail Length; Setting The Thread Detector Sensitivity - Janome MB-4 Instruction Book

08 ON
09
OFF
10 M
11 8

[08] Reminder message ON/OFF

When you press the START/STOP button, a reminder
message will appear on the LCD screen. However,
you can turn off the reminder.
Press the right arrow button
turn off the reminder.
Press the ENTER button to register the new setting or
press the upward arrow button
setting.

[09] Ignoring short stitches

Very short stitches may cause the thread to break.
To avoid this problem, turn on the ignoring short
stitches function.
Press the right arrow button
Press the ENTER button to register the new setting or
press the upward arrow button
setting.

[10] Setting the trim tail length

Some times you need to adjust the tail length of the
thread being trimmed depending on the thickness and
type of the thread.
Press the right or left arrow button
the trim length.
You can select one of the following options.
S: Short
M: Medium
L: Long
Press the ENTER button to register the new setting or
press the upward arrow button
setting.
[11]

Setting the thread detector sensitivity

You can adjust the sensitivity of the thread detector by
setting stitch count to judge thread breakage.
Press the right or left arrow button
the sensitivity. The adjustable range is from 3 to 16.
Press the ENTER button to register the new setting or
press the upward arrow button
setting.
59
to indicate [OFF] to
to go to the next
to indicate [ON].
to go to the next
to adjust
to go to the next
to adjust
to go to the next