Set The Telephone Line Type - Brother MFC-J615 Quick Start Manual

Table of Contents

Advertisement

11
Set the telephone line
type
If you are connecting the machine to a line that
features PBX or ISDN to send and receive faxes, it is
necessary to change the telephone line type
accordingly by completing the following steps.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Phone Line Set.
d
Press d or c to choose Normal, PBX or ISDN.
Press OK.
e
Press Stop/Exit.
PBX and TRANSFER
The machine is initially set to Normal, which lets the
machine connect to a standard PSTN (Public
Switched Telephone Network) line. However, many
offices use a central telephone system or Private
Branch Exchange (PBX). Your machine can be
connected to most types of PBX. The machine's
recall feature supports timed break recall only (TBR).
TBR will work with most PBX systems allowing you to
gain access to an outside line, or transfer calls to
another extension. The feature works when the Tel/R
key is pressed.
8
12
Set the phone line
compatibility
If you are connecting the machine to a VoIP service
(over the Internet) you need to change the
compatibility setting.
Note
If you are using an analogue telephone line you
can skip this step.
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Compatibility.
d
Press d or c key to choose
Basic(for VoIP).
Press OK.
e
Press Stop/Exit.

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Table of Contents