Table of Contents
Advertisement
Network frequency mode
If you intend to use the fast Quick scan method in Frequency
scan to search for channels, select Automatic . The TV will use 1
of the predefined network frequencies (or HC - homing
channel) as used by most cable providers in your country.
If you received a specific network frequency value to search for
channels, select Manual .
Network frequency
With the Network frequency mode set to Manual , you can
enter the network frequency value received from your cable
provider here. To enter the value, use the number keys.
Frequency scan
Select the method of searching for channels. You can select the
faster Quick scan method and use the predefined settings used
by most cable providers in your country.
If this results in having no channels installed or if some channels
are missing, you can select the extended Full scan method. This
method will take more time to search for and install channels.
Frequency step size
The TV searches for channels in steps of 8MHz .
If this results in having no channels installed or if some channels
are missing, you can search in smaller steps of 1MHz . Using the
1MHz steps will take more time to search for and install
channels.
Digital channels
If you know your cable provider is not offering digital channels,
you can skip searching for digital channels.
Select Off .
Analogue channels
If you know your cable provider is not offering analogue
channels, you can skip searching for analogue channels. Select
Off .
Reception quality
If you receive digital channels, you can check the quality and
signal strength of a channel.
If you have your own antenna, you can reposition the antenna
to try and improve the reception.
To check the reception quality of a digital channel . . .
1 - Tune to the channel.
2 - Press and select Setup and press OK .
3 - Select Channel settings > Channel installation > Digital :
reception test and press OK .
The digital frequency is shown for this channel. If the reception is
poor, you can reposition your antenna. To check the signal
quality of this frequency again, select Search and press OK .
To enter a specific digital frequency yourself, use the remote
control digit keys. Alternatively, select the frequency, position the
arrows on a number with and and change the number with
and . To check the frequency, select Search and press OK .
If you use DVB-C to receive channels, the option Symbol rate
mode is available. For Symbol rate mode, select Automatic ,
unless your cable provider gave you a specific symbol rate value.
To enter the symbol rate value, use the number keys.
Manual installation
Analogue TV channels can be manually installed, channel by
channel.
To install analogue channels manually . . .
1 - Press and select Setup and press OK .
2 - Select Channel settings > Channel installation > Analogue :
Manual installation and press OK .
• System
To set up the TV system, select System and press OK .
Select your country or the part of the world where you are
now.
• Search channel
To find a channel, select Search channel and press OK . Select
Search and press OK . You can also enter a frequency yourself. If
the reception is poor, press Search again. If you want to store
the channel, select Done and press OK .
• Fine tune
To fine tune a channel, select Fine tune and press OK . You can
fine tune the channel with or .
If you want to store the channel found, select Done and press
OK .
• Store current channel / Store as new channel
You can store the channel on the current channel number or as
a new channel number.
Select Store current channel or Store as new channel .
You can redo these steps until you have found all available
analogue TV channels.
Page 30
- Quick Links:
- App Gallery
Hide quick links:
Advertisement
Table of Contents
