Error Status And Error Resolution - Sam4s GIANT-100 User Manual

2.3. Error Status and Error Resolution

The printer buzzer sounds momentarily or continuously and the ERROR LED
blinks when the printer indicates an Error status.
Error Status Indicators include:
Cutter Jam
•
If buzzer and ERROR LED beeps
or blinks as like:
"Beep Beep---, Beep Beep---" the
printer is on Cutter Jam error status.
» Solution
While the printer is turned on
(the Power LED Is on,) press
the cover button and open the
cover. At this time, the cutter will
automatically reset.
Cutter Not Home
•
If the cutter blade is not in
home position when the normal
waiting time, the printer enters
Cutter Not Home error status.
The buzzer and ERROR LED beeps
and blinks as like:
"Beep Beep Beep----, Beep Beep
Beep----"
» Solution
Solved in the same way as the
cutter Jam error.
Paper Out Error
•
The buzzer and ERROR LED beeps
and blinks as like:
" Beep---,Beep---" When you press
the open button to open the printer
cover, the buzzer will stop. After
this, you may change the paper roll
and continue using the printer.
open
OPERATOR'S Manual
19