Page 2
Do not disassemble ONSIP D1BD. You will void the warranty when disassembled. Use only 12VDC power adapters. If you would like to use the ONSIP D1BD for security, monitoring, please check the legal regulations within the country. Rev. 1.0 (Dec 6, 2013)
Page 3
D1BD User’s Guide Caution Any changes or modifications to this device could void the warranty. Revision History Date Rev No Description Dec 6 , 2013 First manual revision creation. Rev. 1.0 (Dec 6, 2013)
IP connection over the internet or intranet. The ONSIP D1BD is easy to install and owner will experience cost and space savings in the installation owing to the state of the art technologies embedded in the system. Based on Embedded Software Solution (Embedded Web Server, Embedded Streaming Server, Network Protocol), the ONSIP D1BD ensures unprecedented performance and stability to be an ideal video server solution for system integration solutions.
VMS Software ONSIP-Installer ONSIP D1BD (Speco-NVR) PC software to view and record the PC software to allocate an IP H.264 1CH IP Encoder A/V streaming data transmitted from address to the ONSIP D1BD ONSIP D1BD Rev. 1.0 (Dec 6, 2013)
3.1. PC Requirement AV streaming data received from ONSIP D1BD can be decoded or stored in a PC running the Speco-NVR program which is a viewing & recording program for a PC. Minimum requirement of the PC is described below:...
Connect PC and ONSIP D1BD to the network. Prepare a PC to run programs for the installation and video connection (PC is needed to assign an IP address to ONSIP D1BD) Figure 3-1. The DC power is applied through DC adapter.
Page 13
D1BD User’s Guide Install Speco-NVR Speco-NVR is a multi-channel VMS program for to IP camera or Video server. Install Speco-NVR on a remote PC to connect to these products. It is needed to assign connection before connection. Insert the CD provided with the product into the PC and install Speco-NVR.
Page 14
D1BD User’s Guide Click on the field in ③ ③ for sorting and rearranging the list. ③ ③ Select network mode that best suits from the drop down list in ⑤ ⑤ . You can choose either ⑤ ⑤ Static or ADSL and Auto (DHCP), respectively. If ADSL and Auto are selected, the fields in ⑥...
Page 15
Remote video connection to ONSIP D1BD Connection through Web Viewer Web Viewer offers simplest way of video connection to ONSIP D1BD. For video connection, enter the IP address of ONSIP D1BD in the URL field of Internet Explorer as: The default port 80 can [ e .
Page 16
SAVE button. You can see the live video when you click the live view button as below. When you exit Speco-NVR, you have to input the ID/PW, admin/1234. Details for the Speco-NVR can be found in [Speco-NVR User’s Guide].
Page 17
D1BD User’s Guide 4. Additional settings through connection to the Admin Page All the parameters of product follows factory default values. For more sophisticated target application it is needed to change parameters. The admin page can be connected through ”http://IP_address:HTTP_port_number”/admin.htm It is needed to enter ID and password of the administrator.
The power and network connection should be made through separate cables. It is recommended to use a DC adapter supplied by Speco Technologies. In case of replacing the DC power supply, make sure that the power supply meets the power requirement of the unit to prevent damage or malfunction.
D1BD User’s Guide 4.2. Cannot connect to the Video Check the status of the network connection through PING test. Try the following on your PC: Start > Run > Cmd > Ping IP address (Ex : Ping 172.16.42.51) If “Reply from ~” message is returned ( in the figure below), the network connection is in normal state.
4.3. Windows Vista or Windows 7 Windows Vista and Windows 7 users need to configure UAC (User Access Control) and Privilege Level for proper recording and still video capture in Speco-NVR and Web Viewer. <Windows Vista> 1. UAC (User Access Control) configuration 1) Double-click “User Accounts”...
Page 21
D1BD User’s Guide <Windows 7> 1. UAC (User Access Control) configuration 1) Double-click “User Accounts” in control panel 2) Double-click “Change User Account Control setting” 3) Set to “Never notify” Rev. 1.0 (Dec 6, 2013)
Page 22
D1BD User’s Guide 2. Privilege Level Control 1) Select “NVR” icon on the desktop 2) Click right mouse button and select “properties” 3) Check “Privilege Level” in “Compatibility” tab Rev. 1.0 (Dec 6, 2013)
D1BD User’s Guide 4.4. Technical Assistance If you need any technical assistance, please contact your dealer. For immediate service please provide the following information. 1 . 1 . 1 . 1 . Model name MAC address and Registration number 2 . 2 . 2 . 2 .