Saw Chain Filing And File Gauges - Husqvarna 357XP/XPGl 357XP E-tech Operator's Manual

Recommended cutting equipment for USA
Following is a list of recommended cutting equipment for Husqvarna chain saw models 357XP, 357XPG, 357XP E-tech,
357XPG E-tech, 359, 359 E-tech, 359G and 359G E-tech. These chain saw models equipped with either of the listed
bar and saw chain combination(s), fulfills the requirements according to ANSI B175.1-2000 (Gasoline Powered Chain
Saws - Safety Requirements).
The following list is the chain saw manufacturers recommendations. There may be other combinations available, which
will also achieve kickback reduction.
Chain saw models Husqvarna 357XP, 357XPG, 357XP E-tech, 357XPG E-tech, 359, 359 E-tech, 359G and 359G E-
tech met the kickback performance requirements of ANSI B175.1-2000 when tested with the combinations of bars and
saw chains listed below. The saw chain Husqvarna H30 is also classified as a low kickback saw chain since it met the
requirements for low kickback saw chain outlined in ANSI B175.1-2000. We recommend to use only the listed
combinations of bars and chains for chain saw models Husqvarna 357XP, 357XPG, 357XP E-tech, 357XPG E-tech, 359,
359 E-tech, 359G and 359G E-tech. Other chain saw models may not meet the kickback requirements when equipped
with the listed guide bar and saw chain combinations.
Length, inch Pitch, inch
13
15
16 0.325
18
20
13
15
16 0.325
18
20
15
16
18 3/8"
20
24
Note: For the saw chains above (if available) you are free to choose between 0.050" or 0.058" gauge drive links for the
corresponding bar, see the table below.
0,050" H30 H22
0.058" - H25
Saw chain filing and file gauges
Technical data
Guide bar
Gauge, inch Max. nose radius
0.050 10T
10T
0.058
12T
0.058 11T
Saw chain
Type Drive link count
56
64
Husqvarna H30 66
72
78
56
64
Husqvarna H25 66
72
78
56
60
Husqvarna H42 68
72
84
English – 41