Jacuzzi J - 480 Owner's Manual page 58

J-400
A. To access the Interior solid Color mode:
1. Press button A to activate the solid color mode.
note: The default color and intensity will always be the last color and
intensity used.
2. Press again to turn off.
3. Press either the Left or Right button of the Quad Keypad to scroll
through or select one of the 7 different colors (Figure C).
• Press the Left button to move forward in the color sequence. (Blue-
Cyan-Green-Yellow-Orange-Red-Purple-Blue).
• Press the Right button to move backwards in the color sequence. (Blue-
Purple-Red-Orange-Yellow-Green-Cyan-Blue).
Blue
4. The intensity of the lights can be controlled
in both the solid color or light rotation modes
by using the Quad Keypad (Figure D).
• Press the Up button to increase the intensity
in 25% increments.
• Press the Down button to decrease the intensity in
25% increments.
note: The intensity range is from 25% to 100%, in increments of 25%. As
the intensity is increased/decreased the bulb will darken/lighten to reflect
the effect. Intensity defaults to the last setting used.
B. To access the Interior light
rotation mode
The lighting performance can be user
enhanced by controlling the intensity
and frequency effects as follows:
1. Press button C to enter the Light
Rotation Mode (Figure E).
2. To control the speed of the light
rotation use the Quad Keypad by
pressing the Right button to
increase the speed of the light
rotation speed from 1, 2, 3, 4, 5 or 6 (60, 33, 18, 10, 5 or
3 seconds, respectively) or press the Left button to
decrease the speed of the light rotation from 6, 5, 4, 3, 2 or 1 (3, 5,
10, 18, 33 or 60 seconds, respectively). On the LCD display you will
see a number from 1-6 to indicate the speed selection (Figure F).
Page 52
Purple Red Orange
Cyan
Yellow Green
25% 50% 75% 100%
ROTATION
Displays
Speed
Information
1 2 3
(60 sec) (33 sec) (18 sec) (10 sec) (5 sec) (3 sec)
Figure C
Figure D
Brightness
Figure E
4 5 6
Figure F