Epson dreamio EH-R4000 User Manual page 39

Network information
Basic
Wired LAN
Mail
AMX Device Discovery
Reset
Only displayed for composite video/S-Video input
Only displayed for component video/Computer image input
Lamp Hours
Source
Input Signal
Resolution
Scan Mode
Refresh Rate
Sync Info
Video Signal
Deep Color
Status
Serial Number
Reset All
Reset Memory
Reset Lens Position
Reset Lamp Hours
Projector Name
p.45
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
p.45
Projector Name
PJLink Password
Web Control Password
p.45
DHCP
IP Address
Subnet Mask
Gateway Address
p.46 Mail Notification
SMTP Server
Port Number
Address 1 Setting
Address 2 Setting
Address 3 Setting
p.46
p.46
• The message text will be displayed in yellow when it is time to replace the lamp.
• Time from 0H to 10H will be displayed as 0H. From 10H onwards, the display will be in units of 1H.
The "Info" menu is only used to display the projector status.
Display the color depth of HDMI transmission.
This is information about errors that have occurred on the projector.
This value is sometimes referred to when inquiries are made.
This value is sometimes referred to when inquiries are made.
p.47
p.47
p.47
p.47
Configuration Menu Functions
On, Off
On, Off
On, Off
Yes, No
37