Preparing the Remote Control
Inserting batteries into the remote control
If delays in the responsiveness of the remote control occur or if it does not operate
after it has been used for some time, it probably means that the batteries are
becoming flat. When this happens, replace them with new batteries. Have two AA
TIP
size manganese or alkaline batteries ready. You cannot use other batteries except for
the AA size manganese or alkaline.
Using the remote control
Operating range (horizontal)
Operating range (vertical)
At the time of purchase, the batteries are not
inserted into the remote control. Insert the supplied
batteries before using the remote control.
Check the (+) and (-) indications inside the battery compartment
and insert the batteries so that they face correctly.
Approx.30
Approx.30
Approx.10m
Operating distance
Approx.60
Approx.10m
Operating distance
Lift up the battery cover while pressing its
tab.
Insert the batteries in the correct direction.
Close the cover.
Approx.30
Approx.30
Approx.10m
Operating distance
Approx.30
Approx.30
Approx.10m
Operating distance
13