Make Electrical Connection; Complete Installation - KitchenAid 30" (76.2 CM) RANGE HOOD Installation Instructions And Use & Care Manual

Make Electrical Connection

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
A
B
C
D
A. White wires
B. Black wires
C. UL listed wire connectors
D. Green (or bare) and yellow-green ground wire
E. Home power supply cable
F. UL listed or CSA approved ½" strain relief
2. Use UL listed wire connectors and connect the black wires
(B) together.
3. Use UL listed wire connectors and connect the white wires
(A) together.
4. Connect green (or bare) ground wire from home power supply
5. Install terminal box cover.
E
6. Reconnect power.
For optional power cord kit installations, follow the instructions
supplied with the power cord kit. See the "Assistance or Service"
section for information on ordering.
F
NOTE: Use only with range hood cord connection kits that have
been investigated and found acceptable for use with this model
range hood.
1. Replace grease filters. See the "Range Hood Care" section.
2. Check the operation of the range hood fan and lights. See
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.
WARNING
Electrical Shock Hazard
Electrically ground blower.
Connect ground wire to green and yellow ground wire
in terminal box.
Failure to do so can result in death or electrical shock.
to the yellow-green ground wire (D) in the terminal box using
UL listed wire connector.
Optional Power Cord Kit Installations

Complete Installation

"Range Hood Use" section.
If range hood does not operate, check to see whether a
circuit breaker has tripped or a household fuse has blown.
Disconnect power and check wiring connections.
11