Inserting And Removing A Sim - HP Notebook pc User Manual

For information about inserting and removing the SIM, see
on page 20
For information about HP Mobile Broadband and how to activate service with a preferred mobile
network operator, see the HP Mobile Broadband information included with your computer. For
additional information, see the HP website at
countries only).

Inserting and removing a SIM

CAUTION:
To insert a SIM, follow these steps:
1. Shut down the computer.
2. Close the display.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the battery bay toward you.
6. Remove the battery. See
7. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
NOTE:
inserted into your computer.
8. Replace the battery.
NOTE:
9. Reconnect external power.
10. Reconnect external devices.
11. Turn on the computer.
To remove a SIM, press in on the SIM, and then remove it from the slot.
20 Chapter 3 Connecting to a network
section in this chapter.
To prevent damage to the connectors, use minimal force when inserting a SIM.
Inserting or removing the battery on page 39
See the image on the battery bay to determine which way the SIM card should be
Inserting or removing the battery on page 39
HP Mobile Broadband will be disabled if the battery is not replaced.
Inserting and removing a SIM
http://www.hp.com/go/mobilebroadband (select regions/
for more details.
for more details.